NEO Waterproof Grease Heavy Duty HP 800 Lubricate to 800 Degree F Neo Synthetic Oil
- 英文名稱：NEO Waterproof Grease Heavy Duty HP 800 Lubricate to 800 Degree F Neo Synthetic Oil
- 品牌：NEO Waterproof Grease Heavy Duty HP 800 Lubricate to 800 Degree F Neo Synthetic Oil
- 貨號：NEO Waterproof Grease Hea...
- 發布日期： 2025-04-01
- 更新日期： 2026-03-13
產品詳請
| 貨號 |
NEO Waterproof Grease Heavy Duty HP 800 Lubricate to 800 Degree F Neo Synthetic Oil
|
| 品牌 |
NEO Waterproof Grease Heavy Duty HP 800 Lubricate to 800 Degree F Neo Synthetic Oil
|
| 是否危險化學品 |
|
| 型號 |
NEO Waterproof Grease Heavy Duty HP 800 Lubricate to 800 Degree F Neo Synthetic Oil
|
| 產品等級 |
其他
|
| 包裝規格 |
罐
|
| CAS編號 |
|
| 純度 |
98%
|
| 別名 |
NEO Waterproof Grease Heavy Duty HP 800 Lubricate to 800 Degree F Neo Synthetic Oil
|
| 密度 |
1.3g/cm3
|
| 產地/廠商 |
|
Description
Waterproof HP 800 Multipurpose grease. NEO HP 800 Heavy Duty EP grease for plain and rolling element bearings, and sliding
mechanisms operating in generally difficult conditions. Exceptionally resistant to water wash out including emulsions, NEO HP8oo was
designed specifically for precision rolling element bearings in high performance racing cars.
This grease is slightly thinner in consistency and has a higher viscosity synthetic fluid incorporated in its design as compared to
greases normally used for passenger vehicles and is designed to lubricate to 425 degree C(800 degree F).
NEO HP800 multipurpose grease is designed for the peripheral speeds encountered by wheel bearings in racing which are 3 to 6
times that of passenger cars and prevent channeling of the grease under these conditions which requires a lighter consistency
product.
Due to the excessive heat generated by oversized disk brakes, the fluid constituent of the grease is synthetic and of a higher viscosity
to provide the proper oil viscosity at operating temperature. thereby preventing thin film rupture and excessive wear.
Special additive technology and synthetic fluids give high film strength under EP conditions with exceptional oxidative and thermal
stability. Can be used on sensitive metallurgy including copper. silver, tin, aluminum, and their alloys. Highly specialized mixed base
complex soap structure provides high dropping point, mechanicaland thermal stability. Low bleed characteristics ensure protection at
high temperatures and high radial forces.
